Tsugami

Tsugami B0385-II
Tsugami

Tsugami BO385-II

The B0385 38mm 5-axis machine is designed to cut metal. Lots of it! Quickly and with legendary Tsugami accuracy.

Learn More

Tsugami B0326-II
Tsugami

Tsugami BO326-II

The Tsugami B0326-II easily and quickly converts from direct-drive guide bushing bar-fed operation to non- guide bushing operation when fitted with an optional chucker kit.

Learn More

TSUGAMI TECHNOLOGY BULLETIN

Tsugami S205 – An Unbeatable Value

The Tsugami S205 CNC Lathe is CONVERTIBLE and may be run as a traditional sliding headstock Swiss Turn using the guide bushing or run without the guide bushing with the addition of an optional “chucker” kit. When run as a “chucker” the CNC lathe can use drawn bar stock instead of centerless ground stock, dramatically reducing remnant size and increasing shop flexibility.

Tsugami S205 Opposed Gang Tool CNC Lathe Key Features:

  • CAT 40 Big-Plus Dual Contact Spindle System
  • Modular Tool Zone uses cartridge-type live tools, up to 11 – 8,000 rpm tools
  • Direct Drive Rotary Guide Bushing provides high [...]
November 4th, 2016|Blog, Tsugami News|

Tsugami B0385

The B0385 is a compliment to the SS32 and the BH38SY machine. It is a heavy duty 38mm machine with a gang style layout that is less complicated to use and very competitively priced.

The B0 385 7-axis Swiss Turn is the largest gang-style precision lathe in its class and very competitively priced, according to Scott Anthony, National Sales Manager of Rem Sales. With its rigid frame, integral double spindle and capacity to hold 3/4-inch square shank turning tools, the B0 385 performs heavy duty cutting with high precision and accuracy.

A powerful 15 HP [...]

March 24th, 2014|Tsugami News|

Tsugami S207

The S207 was well received at IMTS and the first units have been sold.

The new Tsugami S207 20mm Swiss Turn with continuous B-axis movement is the only Swiss Turn in its class with continuous B-axis movement.

The S207 with B-axis milling was developed in direct response to market demand for technology capable of machining complex, precision contoured shapes.


The machine is also chucker convertible and has a shared platform with S205 and S206.

March 24th, 2014|Tsugami News|

New Thread Whirling Unit

Tsugami now has a solution to thread whirl bone screws with high helix angles. Some bone screws with multi-start threads require a thread whirling unit that has the capability to be set at an angle higher than 20 degrees.

Tsugami has developed a new thread whirling unit that can be set to angles as high as 30 degrees. Rem Sales LLC has recently produced screws with dual-start threads. This was done by utilizing the new thread whirling unit mounted on an SS20 platform. A 30 degree thread whirling unit is also available for the Tsugami BH20 platform.

Another [...]

March 21st, 2014|Tsugami News|